Medical Glass Vials Product Description

The production of Hongjin control glass bottle is mainly the processing of bottle mouth and bottle bottom. The mold is the bottle mouth mold of glass bottle. Big bottle mouth, small flat mouth, screw bottle mouth, bayonet and tongs are all made of different molds, so the appearance of bottles produced is different. The height of the bottle is set by our bottle maker on the machine.

Shanxi Hongjin company selects high-quality glass pipes as raw materials. After the glass pipes enter the factory, they are weighed (weight) and divided into 3 parts according to the positive and negative 5g. Bottle making personnel take materials into the workshop for production. The glass tube is inserted into the sleeve of bottle making machine from top to bottom. The machine is equipped with oxygen airway, liquefying air duct and air duct to process the glass bottle. The production of tube glass bottle is mainly the processing of bottle mouth and bottle bottom. The mold is the bottle mouth mold of glass bottle. Big bottle mouth, small flat mouth, screw bottle mouth, bayonet and tongs are all made of different molds, so the appearance of bottles produced is different. The height of the bottle is set by our bottle maker on the machine. The thickness of the bottle is determined by the diameter of the glass tube purchased by our company's purchasing staff in the glass tube factory. The shape and capacity of the bottle are derived from this.

Hongjin tube glass bottle, each glass bottle from the bottle making machine is directly queuing up to enter the random annealing furnace. Glass bottles are annealed at 550-600 ℃ for 50 minutes. The purpose of annealing is to ensure the stress of the glass bottle and to achieve the compression resistance of the bottle. Then the glass bottle went to the next link, manual inspection and packing. Inspection personnel are divided into three types: glass bottle inspection personnel, inspection packing personnel, sampling personnel. Manual inspection of packing can be divided into inspection of glass bottles, packing of small boxes, inspection of bottles in small boxes, coating, heat sealing, inspection of packing and sampling. The samples were sent to the laboratory for inspection. The products that meet the national standards through the laboratory inspection are qualified products.

Medical Glass Vials Product introduction

Medical Glass Vials Product Features

1. Ensure the quality of raw materials, and inspect the physical and chemical properties, appearance, specifications and dimensions of raw materials in strict accordance with the standard requirements.

2. According to the pipe selection classification standard of the system, the material is classified into fine pipe, medium pipe and thick pipe according to the pipe selection classification standard of the system, card plate detection and weighing test.

3. Self inspection, mutual inspection, patrol inspection and sampling inspection shall be carried out in strict accordance with the specifications, dimensions and appearance quality of bottle making workshop to ensure that the products meet the standard requirements

4. The quality inspection department shall carry out in-house inspection on the glass bottles of controlled oral liquid, and the quality assurance department shall be responsible for the product quality and pre delivery inspection.

5. Test method: high precision stress measuring instrument is used for stress detection, vernier caliper with accuracy of 0.02mm is used for specification and dimension, and precision of inner diameter of bottle mouth is used for measuring 0.02mm inner diameter feeler gauge was used to check the bottle mouth height, 0.05mm precision bottle mouth edge instrument was used to detect the vertical axis deviation, 0.01mm precision vertical tester was used to detect the vertical axis deviation, 0.01mm precision wall thickness tester was used to detect the bottle bottom thickness, 0.01mm bottle bottom thickness gauge was used to measure the bottle bottom thickness, and high pressure steam sterilizer was used to test the chemical stability.

6. After the products have been fully inspected, random inspection must be carried out, and ex factory inspection must be carried out to ensure that the product quality meets the standard requirements

Our Company

Focus on medical glass bottles, cosmetics bottles for more than 20 years

Pre-sale service:

• We provide presales service in various forms, for example, design proofing and open mold of the

products according to the customer needs, provide the Logo Printing as clients' requirements,etc.

• Send the samples to the clients as a reference

• Investment budgeting: We provide services of product profit analysis, recommendation

of product and relevant budgeting.

• Detailed design and technological process of products

• Schedule about design,manufacturing and shipping

• Develop related products to match each products as clients' requirements

• Working & Producing progression

After-sale service :

•We will answer customer's question in time. If needed, we will offer online assistance.

• We will keep the sample of the products, so that clients can order and change this model of products again.

• We can provide free guidance if customers need new design, add or rebuild products.

• We will provide samples of new series of products for the former customers.

Production process

Packaging and quality inspection process

Packing Details : Shrink wrapped first, then put into cartons with paper or plastic pallet. we can also packing it according to your requirements.

Delivery time：1-20days

Vials packed in PP-Trays with plastic film and cover plate.

Neutral carton outside, pallet is available to protect quality better.

OEM packing is also available.

Caps and septa packed in transparent PE bag.

GC septa packed in glass bottle.

Neutral carton outside, pallet is available to protect quality better.

OEM packing can be also provided.

RFQ

1.What’s your advantages?

Superior Quality,Fast Delivery,Competitive Prices,Advanced Production Equipment Standardized Warehouse Logistics and Professional Service.

2. Can you provide OEM service?

Yes, we accept OEM orders for which the material, design, color and size will all be made at your request with your logo on your products.

3.Can you send a sample for my reference?

Sure,we are free to send you a sample and you just need to pay the delivery fee.

4. How about your ordinary delivery period?

Usually we keep our regular products in adequate stock. Quick delivery is available for stock products. But for some customized products, the delivery period will be 7-30 days according to the different orders.

Shanxi Hongjin pharmaceutical packaging Co., Ltd. is a modern enterprise constructed and implemented in strict accordance with GMP standards. It is a member unit of China Pharmaceutical Packaging Association. It is an enterprise with large production scale, many series products and high quality in the domestic pharmaceutical package industry. Our company was founded in 1986, It covers an area of 53000 square meters and now has more than 700 employees, including more than 200 professional and technical personnel. The company has three branches, mainly producing glass bottles, medicinal glass bottles, controlled glass bottles, oral liquid bottles, controlled antibiotic bottles, controlled screw mouth bottles, reagent bottles, cosmetic bottles, essential oil bottles, injection plastic holders, oral liquid plastic trays, aluminum caps, aluminum plastic composite covers, Full tear off aluminum cover, electronic blister packaging, food Blister products, electric cap locking machine, small quantitative filling machine. Strong technical force, advanced technology and equipment, complete detection system and rich production experience.

http://www.hongjinglass.com/