- drawwork01
- 2017-12-23 18:30
- 1.All of the axle bearings adopt roller bearing. The axle is made of alloy steel and the chain is of forced lubrication.
2. Roller groove. The high and low speed ends of the roller are equipped with ventilated pneumatic tube clutch.
3. The brake wh...
- Traveling hook
- 2017-12-18 16:12
- The design and manufacture of traveling hook conform to API Spec 8A,8C specifications.
The sheave rope groove goes through quenched processing with wear resistance and long life.
The main components of the hook adopt high tense alloy and get throug...
- TQ Casting tong
- 2017-12-17 00:58
- TCS torque monitoring system can be co-used with drilling power tongs,casting power tongs, tube power tongs, and twisting machine, guaranteeing operation quality. The products have bellowing characteristics,...
- Tubing head spool
- 2017-12-16 23:20
- Tubing head spool is usually set on the upper flange of castings to hang the tubing and seal the annular space between tubing and casting. It is consisted of tubing head pool and tubing hanger....
- Hook Hook Hook
- 2017-12-10 09:34
- 1.The hook meets specification API 8A;
2.Special structure inside the barrel has supper performance on hydraulic buffering.
3.Main hook possesses dual safety device;
4.Main parts use high-strength alloy steel and all pass nondestructive test....
- S-type flashboard blowout preventer
- 2017-11-29 19:47
- All S-type flashboard blowout preventers are designed and produced according to API Spec 16A & GB/T20174. Equipped up with flashboards of different specification, these products can be widely used for various demands....
- Cone fisher
- 2017-11-29 08:47
- Cone fisher is used to salvege bits and cones which fall downhole during drilling and workover operations. With strong grinding force, it is suitable for salvage and coring operations in harder layer....
- rotary table
- 2017-11-28 01:30
- 1.Big and small gears are both made of alloy steel.
2.The integral tonifying heart is steel casting.
3.Transmission type can contain API-standard kellys and roller bushing of hexagonal kellys. Long and short slips are both appliable.
4.The rotary ...
- Taper tap
- 2017-11-18 20:33
- Taper tap is used to create button in inner holes of fallen objects which have holes,such as oil pipe, drill pipe, casing and milling pipe, packer, water distributer and bottom hole regulator and then slavage them. This tool proves to be effective fo...
- land drilling rig01
- 2017-11-07 17:38
- It is a land drilling rig with max. 7000m drilling ability, mainly used in oil or gas exploration and exploitation of 4500~7000m depth(drill pipe 4 1/2”) or 4000~6000m depth(drill pipe 5”)....
- Slider slips fishing spear
- 2017-11-04 22:39
- Slider slips fishing spear is an inside fishing tool. It not only can fish tools which have inner bores such as drill string, oil pipes,casing and milling pipes, liner tubes, packers and water distributors, it can also perform backoff operations on s...
- ZQ Drilling pipe power tong
- 2017-10-26 21:38
- ZQ drilling pipe power tong is a kind of ideal wellhead tool in oilfield, which is widely used in casting threads` loading & unloading in offshore drilling,land drilling, and workover operation. This series are open type products with more flexib...
- land drilling rig02
- 2017-10-09 06:07
- It is a land drilling rig with max. 5000m drilling ability, mainly used in oil or gas exploration and exploitation of 3500-5500m depth(drill pipe 4 1/2”) or 2800-4500m depth(drill pipe 5”)....
- Cable-type fishing hook
- 2017-09-29 17:12
- Cable-type fishing hook is used to salvage electric pump cable or wire ropes which fall downhole and bent sucker rods which fall in casing....
- Mechanical inside cutting knife
- 2017-09-21 17:56
- Mechanical inside cutting knife is a special tool to cut pipes from inside downhole strings. It can cut pipes in any position but coupling. When performing cutting operations, it is advisable to connect Releasable slips fishing spear to upper parts o...
- Reverse circulation fisher with strong magnetism
- 2017-09-21 17:55
- CLF fisher with strong magnetism serves as an tool to salvage small pieces of fallen objects downhole in petroleum and geological drilling operations. With simple structure, convenient operation, reliable performance, small volume and light weight, i...
- SG antifriction bearing indented chisel
- 2017-08-28 15:02
- With high-saturation butadiene acrylonitrile rubber sealing and special treatment of seal part surface, the bit has better sealing which can bear 260℃. Low-wear grease improve the lubricity and service life of bit sealing. Put the cylinder into the c...
- land drilling rig04
- 2017-07-31 21:12
- It is a land drilling rig with max. 3000m drilling ability, mainly used in oil or gas exploration and exploitation of 1600~3000m depth(drill pipe 4 1/2”) or 1500~2500m depth(drill pipe 5”)....
- Bent fish head overshot
- 2017-07-21 19:07
- Bent fish head overshot is an unreleasable tool for salvaging from outside strings....
- Box tap
- 2017-07-21 06:52
- Box tap is used to create button in outside walls of fallen pipes, such as drill pipes and oil pipes, and then salvage them. It can salvage cylinder objects with no inner bores or with sealed inner bores....